Yaesu FT-710 User Manual

45
Record the received audio
You can record and play the received audio on the SD memory card.
Record and play of the received audio may be operated from the Display Panel, or from the optional FH-2
Remote Control Keypad, which plugs into the rear panel REM jack.
• When performing record and play of the received audio, a commercially available SD card is necessary.
• The maximum recording time for one le is about 16 hours. (Maximum le size limit approx. 3.5GB) Record-
ing stops automatically when the maximum le size limit is exceeded.
• Audio les other than those recorded by this unit cannot be played.
• Recording the received audio
1. Insert a commercially available SD memory
card into the SD card slot on the left side of
the transceiver.
2. Press the [FUNC] knob.
3. Touch [RECORD]. A “S.REC” icon will blink
and recording will begin.
The recording time depends on the capacity
of the SD memory card used.
4. Touch [STOP] to end recording.
“S.REC” on the display turns OFF.
• Play the recorded content
1. Press the [FUNC] knob.
2. Touch [PLAY].
The “PLAY LIST” screen will be displayed.
3. Rotate the [FUNC] knob to select the file
name you want to play.
You can also select it by touching [ꞁ◄◄] or [►►ꞁ ] .
4. Touch [►] to start playback.
File name
Start playbackRecorded time
Selected file name
Frequency Mode
5. Rotate the [FUNC] knob during playback to
adjust the volume.
You can also adjust the volume by touching
[RX LEVEL] and turning the [FUNC] knob
when not playing.
Back for 5 seconds
Advance for 5 seconds
Volume
Playback elapsed time
pause
6. Touch [BACK] to return to normal operation.
• Erase the recorded content
1. Press the [FUNC] knob.
2. Touch [PLAY].
The “PLAY LIST” screen will be displayed.
3. Rotate the [FUNC] knob to select the file
name you want to delete.
4. Touch [DELETE].
5. Touch [OK] to delete it.

Yaesu FT-710 Specifications

General

Brand	Yaesu
Model	FT-710
Category	Transceiver
Language	English