P PRMTRC EQ3 BWTH
Function: Sets the width (“Q”) for the high range
of the 3 Band Parametric Microphone
Equalizer when the AMC or speech
processor is activated.
Available Values: 0 - 10
Default Setting: 1
Description: Activates when the AMC or speech
processor is “ON”, and sets the
width (‘Q”) for the high range of the 3
Band Parametric Microphone Equal-
izer between “0” and “10”.
OPERATION SETTING
- TX GENERAL -
HF MAX POWER
Function: Sets the transmit RF power output of
the HF band.
Available Values: 5 - 100W
Default Setting: 100W
50M MAX POWER
Function: Sets the transmit RF power output of
the 50 MHz band.
Available Values: 5 - 100W
Default Setting: 100W
70M MAX POWER
Function: Sets the transmit RF power output of
the 70 MHz band.
Available Values: 5 - 50W
Default Setting: 50W
AM MAX POWER
Function: Sets the transmit RF power output of
the AM mode.
Available Values: 5 - 25W
Default Setting: 25W
VOX SELECT
Function: Selects the function of the VOX opera-
tion.
Available Values: MIC / USB / REAR
Default Setting: MIC
Description:
MIC: Operates via input from the MIC jack (mi-
crophone).
USB: Operates via input from the USB jack.
REAR: Operates via input from the RTTY/DATA
jack.
EMERGENCY FREQ TX
Function: Enables TX/RX operation on the Alas-
ka Emergency Channel, 5167.5kHz.
Available Values: OFF / ON
Default Setting: OFF
Description: When this Menu Item is set to “ON”,
the spot frequency of 5167.5 kHz will
be enabled. The Alaska Emergency
Channel will be found between the
PMS memory channel “M-P9U (or
5-10)” and the memory channel “M-
01”.
Important: The use of this frequency is restrict-
ed to stations operating in or near
Alaska, and only for emergency pur-
poses (never for routine operations).
See §97.401(c) of the FCC regula-
tions.
95
To Next Page
Loading...
Need help?
General
