To Next Page

To Previous Page

About this manual

To select an item displayed on the screen of the FT3DR/DE, either touch the item direct-

ly on the display, or rotate the DIAL knob to select the item, and then press the [DISP]

key. In this manual, only the touch screen operation is described when either operation

can be performed.

The following notation is also used in this manual.

This icon indicates cautions and information that should be read.

This icon indicates notes, tips and information that should be read.

Due to product improvements, some of the illustrations in the instruction manual may differ from the

actual product. Please note.

Default Chapter2
- Table of Contents2
Introduction5
Quick Guide6
Controls & Connections7
- Transceiver7
- Operation Keys8
- Changing the Transceiver Settings8
- Touch Screen Display9
Safety Precautions ( be Sure to Read )15
About this Manual19
Supplied Accessories and Options20
- Supplied Accessories20
- Available Options20
Preparation21
- Installing the Antenna21
- Attaching the Accessory Protective Cap/Belt Clip21
- Installing the Battery Pack21
Charging the Battery Pack22
External Power Supply22
Using a Microsd Memory Card23
- Usable Microsd Memory Cards23
- Mounting and Dismounting Microsd Memory Card23
- Formatting a Microsd Memory Card23
Operation24
- Turning the Transceiver on24
- Adjusting the Volume Level24
- Adjusting the Squelch Setting25
- Toggling the Operating Band25
- Selecting a Frequency Band26
- Tuning to a Frequency26
  - Changing the Frequency Step27
- Selecting the Communication Mode27
  - Fixing the Communication Mode28
- Transmitting28
- Changing the Transmit Power Level29
- Locking the Keys and DIAL Knob29
Using the Convenient Digital C4FM Features30
- About the Digital Group ID (DG-ID) Feature30
- Communicating with the DG-ID Feature30
  - Setting the Transmit and Receive DG-ID Number to "00" to Communicate with All Other Stations Using C4FM Digital Mode30
  - Communicate Only with the Specific Members by Setting the DG-ID Number Except for "0031
Repeater Operation33
Using the Memory34
- Registering to Memory Channels35
- Recalling a Memory Channel35
- Clearing Memories36
- Restore Erased Memory36
- Recalling the Home Channels36
- Changing the Home Channel Frequency36
- Using Memory Tag37
- Memory Channel List37
- Split Memory37
- Using Memory Bank37
Scanning Function38
- VFO Scan38
- Memory Channel Scan38
- Setting the Receive Operation When Scanning Stops39
- Weather Alert Scan39
- Skip Memory Channels, and Specified Memory Channels40
- Programmable Memory Scan (PMS)40
- Dual Receive (DW) Feature40
Convenient Preset Receiver Memory Channels41
- Preset VHF Weather Broadcast Receiver Memory Channels42
- Preset International VHF (Marine) Radio Receiver Memory Channels43
- Preset Worldwide Shortwave Broadcast Receiver Memory Channels44
Convenience Features46
- Bluetooth ® Operation46
- VOX Operation49
  - Setting VOX Function49
  - Set the VOX (Voice Operated Transmit) Delay Time50
- Band Scope50
  - Change Frequency50
  - Change the Number of Channels Displayed50
- CAM (Club Channel Activity Monitor) Function51
- Using the Voice Recording51
- Taking Picture (Snapshot Function)54
  - Taking Pictures55
  - Viewing the Saved Image55
- WIRES-X Function56
- APRS (Automatic Packet Reporting System) Function56
- GPS Function57
- Tone Squelch Feature57
- Digital Code Squelch (DCS) Feature57
- Digital Personal ID (DP-ID) Feature57
Using Set Mode58
- Set Mode Operation58
Tables of Set Mode Operations59
Set Mode: DISPLAY Menu Operations65
- Setting What to Display Using the Smart Navigation Function65
- Setting the Compass Display65
- Setting the Search Channels for the BAND SCOPE Function65
- Changing the Lighting Condition65
- Selecting the Display Language66
- Adjusting the LCD Backlight and Key Button Light Brightness Level66
- Changing the Opening Message Displayed Immediately after Power-On66
- Displaying the Battery Voltage67
- Displaying the Software Version67
Set Mode: TX/RX Menu Operations68
- Mode68
- Digital69
- Audio71
Set Mode: MEMORY Menu Operations72
- Setting Memory Bank Link72
- Assigning Name to Memory Bank72
- Assigning Name to Memory Channel72
- Memory Channel Protect Function72
- Setting Memory Skip Function72
- Setting the Memory Channels Used for Registration73
Set Mode: SIGNALING Menu Operations74
- Notification of a Call from a Remote Station by the Bell74
- Selecting a DCS Code74
- Transmitting and Receiving a DCS Code with an Inverted Phase DCS INVERSION Function74
- Setting the Transmission Method of the DTMF Code74
- Setting the DTMF Code74
- Calling Only a Specific Station (New Pager Function)74
- Enabling No-Communication Squelch Function PR FREQUENCY Function74
- Adjusting the Squelch Level SQL LEVEL Function75
- Setting the Squelch to Activate at a Specified Signal Strength S-Meter Squelch Function75
- Setting the Squelch Type for Transmit and Receive SQL EXPANSION Function75
- Setting the Type of Squelch75
- Selecting a CTCSS Tone Frequency76
- Setting the Sound and Speed During Tone Search Tone Search Function76
- ON/OFF for the Weather Alert Feature76
Set Mode: SCAN Menu Operations77
- Setting the Surveillance Interval Time for Priority Channels DW INTERVAL TIME Function77
- Setting the Illumination On/Off When Scanning Stops LAMP Function77
- Setting the Time to Resume Scanning SCAN RE-START Function77
- Selecting a Receive Operation When Scanning Stops77
- Setting the Scanning Range77
- Setting the Priority Memory Channel Transmit Operation78
Set Mode: GM Menu Operations78
Set Mode: WIRES-X Menu Operations78
Set Mode: CONFIG Menu Operations79
- Turn Power off Automatically Auto Power-Off Function79
- Preventing Accidental Transmission Busy Channel Lockout (BCLO) Function79
- Setting the Key Operation Confirmation Sound79
- Setting the BEEP Volume80
- Turning off the BUSY Indicator80
- Setting the Clock Shift for the Micro Computer Clock Type Function80
- Setting a Time Interval for Saving GPS Position Information81
- Permitting/Prohibiting Transfer of Home Channel Frequency to VFO81
- Setting the LOCK Function81
- Setting the Operation of the MONI/T-CALL Key82
- Turning the Transceiver ON/OFF at the Specified Time Timer Function82
- Password Function82
- Setting the PTT Delay Time PTT DELAY Function83
- Setting the ARS Function RPT ARS Function83
- Setting the Repeater Shift Direction RPT SHIFT Function83
- Setting the Frequency Offset for Repeater Shift RPT SHIFT FREQ Function84
- Disabling Receiver While no Signal Is Received Receiver Battery Save Function84
- Changing the Frequency Step Manually84
- Setting Clock Time84
- Limit the Time of a Continuous Transmission (TOT Function)85
- Setting the Frequency Selection Range for Operation in VFO Mode VFO MODE Function85
- Swapping the Dial Knob Functions85
Set Mode: APRS Menu Operations85
Set Mode: SD CARD Menu Operations86
- Saving/Loading Data To/From86
- Microsd Memory Card86
- Saving/Loading Memory Channel Information To/From Microsd Memory Card86
- Display Microsd Memory Card Information87
- Formatting a Microsd Memory Card87
Set Mode: OPTION Menu Operations88
- Setting the Optional Microphone with Camera for Use88
- Bluetooth88
- Bluetooth Device List88
- Bluetooth Save88
Set Mode: CALLSIGN Menu Operations89
Restoring to Defaults (Reset)90
- All Reset90
- Set Mode Reset90
Text Input Screen91
- Alphabet Input91
- Number Input91
Specifications92
Yaesu Limited Warranty94

Yaesu FT3DR User Manual

Table of Contents

Other manuals for Yaesu FT3DR

Questions and Answers:

Yaesu FT3DR Specifications

Related product manuals

Brand	Yaesu
Model	FT3DR
Category	Transceiver
Language	English