Yaesu FT3DR User Manual

77
Set Mode: CONFIG Menu Operations
1 Turn Power Off Automatically Auto Power-Off Function
Set whether or not to turn the transceiver OFF automatically if there is no operation for a
certain period of time.
1. Press and hold the [DISP] key, and then touch [CONFIG].
2. Touch [1 APO].
3. Rotate the DIAL knob to select the desired setting.
OFF Does not turn the power OFF automatically.
30 minutes to
12 hours
Turns off the power when no operation is performed for a specified
period of time.
Remark The default setting: OFF
• When the auto power-off function is active, [ appears on the LCD.
• Once the time for automatic power-off is set, the new setting is retained. Unless “OFF” is
selected in step 3, the next time the transceiver is turned on, if you perform no operation
for the set period of time, the transceiver will automatically turn OFF.)
2 Preventing Accidental Transmission Busy Channel Lockout
(BCLO) Function
Preventing transmissions when the receive channel is busy.
1. Press and hold the [DISP] key, and then touch [CONFIG].
2. Touch [2 BCLO].
3. Rotate the DIAL knob to select the desired setting.
OFF Permits starting a transmission while receiving a signal.
ON Disables transmissions while receiving a signal.
Remark The default setting: OFF
3 Setting the Key Operation Confirmation Sound
Set whether or not a beep sound is emitted to confirm when keys are operated, when
scanning reaches the end of a frequency band, or when a band edge/CH1 is encoun-
tered.
1. Press and hold the [DISP] key, and then touch [CONFIG].
2. Touch [3 BEEP].
3. Rotate the DIAL knob to select [SELECT], then press the [DISP] key.
4. Rotate the DIAL knob to select the desired setting referring to the table below.
KEY & SCAN Emits the beep sound when a key is operated or scanning stops.
KEY Emits the beep sound when a key is pressed.
OFF Mutes the beep sound.
Remark The default setting: KEY & SCAN
5. Press the [BACK] key.
6. Rotate the DIAL knob to select [EDGE], then press the [DISP] key.
7. Rotate the DIAL knob to select the desired setting referring to the table below.

Yaesu FT3DR Specifications

General

Brand	Yaesu
Model	FT3DR
Category	Transceiver
Language	English