46
Connect with another Bluetooth
®
headset
1. Press and hold the [DISP] key, and then touch [OP-
TION].
2. Touch [2 Bluetooth], and then rotate the DIAL knob
to select [ON].
3. If already connected to a Bluetooth headset, touch
[DISCON] to disconnect.
2 Bluetooth
ON
SSM-BT10
Connected
4. Touch [SEARCH].
Search Bluetooth devices to display them in the de-
vice list in the following order:
(1) Already registered, searched and found
Bluetooth devices: white letters
(2) Searched and found new
Bluetooth devices: white letters
(3) Already registered but not found by search
Bluetooth devices: gray letters
Touch [STOP] to cancel the search.
5. Rotate the DIAL knob to select the desired Bluetooth
device.
6. Touch [CONNECT] to connect.
SSM-BT10
Remove a registered (paired) Bluetooth
®
device from the list
Select the Bluetooth device to be deleted in step 5 above, and touch [DEL].
Display device list
If [3 Bluetooth device list] is touched in step 2 above, Bluetooth devices that have al-
ready been registered are displayed in the device list without performing a search. Con-
nect by turning the DIAL knob and selecting the Bluetooth headset to connect and then
touch [CONNECT].
Bluetooth
®
battery save function
Turning on the Bluetooth Battery Saver feature extends the battery life of the standby
Bluetooth headset.
When the Bluetooth battery save function is “ON”, hands-free operation using VOX (Voice
Operated Transmit) function is not possible. Press the SSM-BT10 [Multifunction] key to
switch between transmit and receive. For details, refer to “Send by pressing the button on
the Bluetooth headset (when the VOX function is off)” (page 47).
To Next Page
Loading...
Need help?
General
