64
7. Rotate the DIAL knob to select the lighting status after the set illumination time
elapses.
OFF After the illumination time selected for [KEY] elapses, the lights
dim to [LEVEL 1] of the LCD dimmer setting.
ON After the illumination time selected for [KEY] elapses, lights
turn off.
Remark The default setting: OFF
When [KEY] is set to CONTINUOUS, regardless of the [SAVE] setting, the illumination stays
lit according to the LCD dimmer setting level.
5 Selecting the Display Language
Select the display language from Japanese and English.
1. Press and hold the [DISP] key, and then touch [DISPLAY].
2. Touch [5 LANGUAGE].
3. Rotate the DIAL knob to select the desired language.
JAPANESE Japanese is selected.
ENGLISH English is selected.
Remark The default setting: English
6 Adjusting the LCD Backlight and Key Button
Light Brightness Level
Adjust the brightness level of the LCD backlight and key button light.
1. Press and hold the [DISP] key, and then touch [DISPLAY].
2. Rotate the DIAL knob, then touch [6 LCD DIMMER]
3. Rotate the DIAL knob to select the desired brightness level.
4. Select from LEVEL 1 to LEVEL 6.
Remark The default setting: LEVEL 6
7 Changing the Opening Message Displayed Immediately
after Power-on
You can select the message under the “YAESU” logo displayed when turning on the
transceiver.
1. Press and hold the [DISP] key, and then touch [DISPLAY].
2. Rotate the DIAL knob, then touch [7 OPENING MESSAGE].
3. Rotate the DIAL knob to select the desired message referring to the following table.
OFF Displays the receive frequency instead of the opening message
immediately after turning on the power.
DC Displays the power-supply voltage and time when turning on the
power.
MESSAGE Displays a message comprising up to 16 characters when turning
on the power. Press the [DISP] key to switch the screen to the
message registration screen. See “Text input screen” on page
89 to input the message you want to display.
To Next Page
Loading...
Need help?
General
