Yaesu FT3DR User Manual

90
Specifications
z
General
Frequency Range : TX 144 - 148 MHz or 144 - 146 MHz
430 - 450 MHz or 430 - 440 MHz
: RX: A- Band 0.5 MHz - 999.995 MHz (USA Cellular Blocked)
B- Band 108 MHz - 580 MHz
Channel Steps : 5/6.25/8.33/9/10/12.5/15/20/25/50/100 kHz
(8.33 kHz: only for Air band, 9 kHz: only for AM Radio)
Mode of Emission : F1D, F2D, F3E, F7W
Frequency Stability : ±2.5ppm (-4°F to +140°F [-20°C to +60°C])
Antenna Impedance : 50Ω
Supply Voltage : Nominal 7.2 V DC, Negative Ground (SBR-14LI)
7.4 V DC, Negative Ground (FNB-101LI)
10.5 - 16 V DC, Negative Ground (EXT DC JACK)
Operating 5.5 - 8.4 V DC, Negative Ground (Li-ion Battery pack)
6 - 16 V DC, Negative Ground (EXT DC)
10.5 - 16 V DC,
Negative Ground (EXT DC: for Charging)
3.6 - 4.5 V DC, Negative Ground (with FBA-39)
Current Consumption :
(Approx.)
140 mA (Mono Band Receive)
170 mA (Dual Band Receive)
86 mA (Mono Band Receive, Standby)
120 mA (Dual Band Receive, Standby)
67 mA (
Mono Band Receive, Standby, Saver On "Save Ratio 1:10" )
67 mA (Dual Band Receive, Standby, Saver On "Save Ratio 1:10")
+18 mA (GPS On)
+ 6mA (Digital)
120mA (AM / FM Radio)
900μA(AutoPowerOff)
1.6 A (5 W TX, 144 MHz 7.2 V DC)
1.9 A (5 W TX, 430 MHz 7.2 V DC)
Operating Temperature Range : -4°F to +140°F (-20°C to +60°C)
Case Size (W x H x D) : 2.44" x 3.94" x 1.28" (62 x 100 x 32.5 mm)
(with SBR-14LI, w/o knob, antenna & Belt clip)
Weight (Approx.) : 9.95 oz (282 g) (with SBR-14LI & Antenna)
z
Transmitter
Output Power : 5 W (@ 13.8 V or SBR-14LI)
(LOW3: 2.5 W / LOW2: 1.0 W / LOW1: 0.3W)
0.9 W (FBA-39)
(LOW1: 0.3 W)
Modulation Type : F1D, F2D, F3E: Variable Reactance Modulation
F7W: 4FSK (C4FM)
Spurious Emission : At least 60 dB below (@TX Power HIGH, LOW3)
At least 50 dB below (@TX Power LOW2, LOW1)

Yaesu FT3DR Specifications

General

Brand	Yaesu
Model	FT3DR
Category	Transceiver
Language	English