45
Subsequent Bluetooth
®
headset connection when the power is turned ON
• When the power is turned OFF while the Bluetooth headset is connected, the next
time the power is turned ON, the same Bluetooth headset is searched for and auto-
matically connected when found.
• If the Bluetooth headset cannot be found, the “
” icon flashes on the screen.
If the power of the same Bluetooth headset is turned ON in this state, it will connect
automatically. If not, turn the FT3DR/DE and Bluetooth headset OFF and then ON
again.
• To connect to other Bluetooth headsets, refer to the “Connect with another Bluetooth
®
headset” on page 46.
Hands-free VOX operation with a Bluetooth headset
When FT3DR/DE VOX (automatic voice transmission) function is turned ON, the Blue-
tooth headset can perform hands-free operation and transmit automatically just by
talking.
Turn the VOX function ON according to “VOX Operation” instructions (page 47).
Transmit operation by pressing the button on the Bluetooth headset
(when the VOX function is OFF)
When the VOX function is OFF, pressing the “Call button”* on the Bluetooth headset
once will keep the FT3DR/DE in transmit and a call can be made using the Bluetooth
headset.
Press the “Call button”* again to return the FT3DR/DE to receive.
*The button name may differ depending on your Bluetooth headset.
SSM-BT10: When the Multi Function Key is pressed, a beep will sound and the FT3DR/
DE will continuously transmit.
Press the Multi Function Key again, a beep will sound and the FT3DR/DE
will return to receive mode.
To Next Page
Loading...
Need help?
General
