To Next Page

To Previous Page

3 Display microSD Memory Card Information

Display information from SD Memory Card.

1. Press and hold the [DISP] key, and then touch [SD CARD].

2. Rotate the DIAL, then touch [3 MEMORY INFO].

The bar graph and the following information will be displayed.

Used space: x,xxx MB

Free space: x,xxx MB

Capacity: x,xxx MB

4 Formatting a microSD Memory Card

Format a new microSD memory card.

For details, see “Formatting a microSD Memory Card” on page 21.

Default Chapter2
- Table of Contents2
Introduction5
Quick Guide6
Controls & Connections7
- Transceiver7
- Operation Keys8
- Changing the Transceiver Settings8
- Touch Screen Display9
Safety Precautions ( be Sure to Read )15
About this Manual19
Supplied Accessories and Options20
- Supplied Accessories20
- Available Options20
Preparation21
- Installing the Antenna21
- Attaching the Accessory Protective Cap/Belt Clip21
- Installing the Battery Pack21
Charging the Battery Pack22
External Power Supply22
Using a Microsd Memory Card23
- Usable Microsd Memory Cards23
- Mounting and Dismounting Microsd Memory Card23
- Formatting a Microsd Memory Card23
Operation24
- Turning the Transceiver on24
- Adjusting the Volume Level24
- Adjusting the Squelch Setting25
- Toggling the Operating Band25
- Selecting a Frequency Band26
- Tuning to a Frequency26
  - Changing the Frequency Step27
- Selecting the Communication Mode27
  - Fixing the Communication Mode28
- Transmitting28
- Changing the Transmit Power Level29
- Locking the Keys and DIAL Knob29
Using the Convenient Digital C4FM Features30
- About the Digital Group ID (DG-ID) Feature30
- Communicating with the DG-ID Feature30
  - Setting the Transmit and Receive DG-ID Number to "00" to Communicate with All Other Stations Using C4FM Digital Mode30
  - Communicate Only with the Specific Members by Setting the DG-ID Number Except for "0031
Repeater Operation33
Using the Memory34
- Registering to Memory Channels35
- Recalling a Memory Channel35
- Clearing Memories36
- Restore Erased Memory36
- Recalling the Home Channels36
- Changing the Home Channel Frequency36
- Using Memory Tag37
- Memory Channel List37
- Split Memory37
- Using Memory Bank37
Scanning Function38
- VFO Scan38
- Memory Channel Scan38
- Setting the Receive Operation When Scanning Stops39
- Weather Alert Scan39
- Skip Memory Channels, and Specified Memory Channels40
- Programmable Memory Scan (PMS)40
- Dual Receive (DW) Feature40
Convenient Preset Receiver Memory Channels41
- Preset VHF Weather Broadcast Receiver Memory Channels42
- Preset International VHF (Marine) Radio Receiver Memory Channels43
- Preset Worldwide Shortwave Broadcast Receiver Memory Channels44
Convenience Features46
- Bluetooth ® Operation46
- VOX Operation49
  - Setting VOX Function49
  - Set the VOX (Voice Operated Transmit) Delay Time50
- Band Scope50
  - Change Frequency50
  - Change the Number of Channels Displayed50
- CAM (Club Channel Activity Monitor) Function51
- Using the Voice Recording51
- Taking Picture (Snapshot Function)54
  - Taking Pictures55
  - Viewing the Saved Image55
- WIRES-X Function56
- APRS (Automatic Packet Reporting System) Function56
- GPS Function57
- Tone Squelch Feature57
- Digital Code Squelch (DCS) Feature57
- Digital Personal ID (DP-ID) Feature57
Using Set Mode58
- Set Mode Operation58
Tables of Set Mode Operations59
Set Mode: DISPLAY Menu Operations65
- Setting What to Display Using the Smart Navigation Function65
- Setting the Compass Display65
- Setting the Search Channels for the BAND SCOPE Function65
- Changing the Lighting Condition65
- Selecting the Display Language66
- Adjusting the LCD Backlight and Key Button Light Brightness Level66
- Changing the Opening Message Displayed Immediately after Power-On66
- Displaying the Battery Voltage67
- Displaying the Software Version67
Set Mode: TX/RX Menu Operations68
- Mode68
- Digital69
- Audio71
Set Mode: MEMORY Menu Operations72
- Setting Memory Bank Link72
- Assigning Name to Memory Bank72
- Assigning Name to Memory Channel72
- Memory Channel Protect Function72
- Setting Memory Skip Function72
- Setting the Memory Channels Used for Registration73
Set Mode: SIGNALING Menu Operations74
- Notification of a Call from a Remote Station by the Bell74
- Selecting a DCS Code74
- Transmitting and Receiving a DCS Code with an Inverted Phase DCS INVERSION Function74
- Setting the Transmission Method of the DTMF Code74
- Setting the DTMF Code74
- Calling Only a Specific Station (New Pager Function)74
- Enabling No-Communication Squelch Function PR FREQUENCY Function74
- Adjusting the Squelch Level SQL LEVEL Function75
- Setting the Squelch to Activate at a Specified Signal Strength S-Meter Squelch Function75
- Setting the Squelch Type for Transmit and Receive SQL EXPANSION Function75
- Setting the Type of Squelch75
- Selecting a CTCSS Tone Frequency76
- Setting the Sound and Speed During Tone Search Tone Search Function76
- ON/OFF for the Weather Alert Feature76
Set Mode: SCAN Menu Operations77
- Setting the Surveillance Interval Time for Priority Channels DW INTERVAL TIME Function77
- Setting the Illumination On/Off When Scanning Stops LAMP Function77
- Setting the Time to Resume Scanning SCAN RE-START Function77
- Selecting a Receive Operation When Scanning Stops77
- Setting the Scanning Range77
- Setting the Priority Memory Channel Transmit Operation78
Set Mode: GM Menu Operations78
Set Mode: WIRES-X Menu Operations78
Set Mode: CONFIG Menu Operations79
- Turn Power off Automatically Auto Power-Off Function79
- Preventing Accidental Transmission Busy Channel Lockout (BCLO) Function79
- Setting the Key Operation Confirmation Sound79
- Setting the BEEP Volume80
- Turning off the BUSY Indicator80
- Setting the Clock Shift for the Micro Computer Clock Type Function80
- Setting a Time Interval for Saving GPS Position Information81
- Permitting/Prohibiting Transfer of Home Channel Frequency to VFO81
- Setting the LOCK Function81
- Setting the Operation of the MONI/T-CALL Key82
- Turning the Transceiver ON/OFF at the Specified Time Timer Function82
- Password Function82
- Setting the PTT Delay Time PTT DELAY Function83
- Setting the ARS Function RPT ARS Function83
- Setting the Repeater Shift Direction RPT SHIFT Function83
- Setting the Frequency Offset for Repeater Shift RPT SHIFT FREQ Function84
- Disabling Receiver While no Signal Is Received Receiver Battery Save Function84
- Changing the Frequency Step Manually84
- Setting Clock Time84
- Limit the Time of a Continuous Transmission (TOT Function)85
- Setting the Frequency Selection Range for Operation in VFO Mode VFO MODE Function85
- Swapping the Dial Knob Functions85
Set Mode: APRS Menu Operations85
Set Mode: SD CARD Menu Operations86
- Saving/Loading Data To/From86
- Microsd Memory Card86
- Saving/Loading Memory Channel Information To/From Microsd Memory Card86
- Display Microsd Memory Card Information87
- Formatting a Microsd Memory Card87
Set Mode: OPTION Menu Operations88
- Setting the Optional Microphone with Camera for Use88
- Bluetooth88
- Bluetooth Device List88
- Bluetooth Save88
Set Mode: CALLSIGN Menu Operations89
Restoring to Defaults (Reset)90
- All Reset90
- Set Mode Reset90
Text Input Screen91
- Alphabet Input91
- Number Input91
Specifications92
Yaesu Limited Warranty94

Brand	Yaesu
Model	FT3DR
Category	Transceiver
Language	English

Yaesu FT3DR User Manual

Table of Contents

Other manuals for Yaesu FT3DR

Questions and Answers:

Yaesu FT3DR Specifications

Related product manuals