FTA-750/FTA-550 OperATing MAnuAl
33
adVanced operatIon
Split Operation
The split operation feature allows you to transmit a call
to a ight service station using the COM band frequen-
cies, while receiving a station in the NAV band. VOR
stations equipped with this capability typically are
shown, on navigation charts, with the voice calling fre-
quency in parenthesis above the navigation frequency.
Programming a transmit frequency
1.
Press the
[
MENU
]
key to display the
MENU
screen
.
2. Select
“
SETUP
” on the
screen by pressing the
[
◄
]
or
[
►
]
key, and
then press the
[
ENT
]
key.
3. Select “
COMM SET-
UP
” on the screen by
pressing the
[
◄
]
or
[
►
]
key, and then press the
[
ENT
]
key.
4.
Select
“
SPLIT FRE-
QUENCY
” on the screen
by pressing the
[
◄
]
or
[
►
]
key, and then press
the
[
ENT
]
key.
ANL
WEATHER ALERT
SCAN BAND
PTT SCAN STOP
SCAN RESUME
SCAN STOP TYPE
DUAL WATCH FREQ.
SPLIT FREQUENCY
COMM SETUP
5.
Enter the transmit
frequency with the
keypad
.
COMM SETUP
SPLIT FREQUENCY
FINISH
---.---
MHz
To Next Page
Loading...
Need help?
General
