Yaesu FTA-550L User Manual

FTA-750/FTA-550 OperATing MAnuAl
58
scannIng operatIon
Note:
When you enable the alarm function at reception of the
weather alert signal via the
COMM SETUP
menu in the
SETUP mode, the last weather channel will be watched
as the every second frequency during a scan.
Example: when the last weather channel is
162.4 MHz, the radio scans in the following order.
108.000 → 162.400 → 108.025 → 162.400 →
108.050 → 162.400 ...
The frequency of the last
weather channel, however,
will not be displayed until
the scanner encounters the
weather alert signal.
132.400
VOL
120.950
133.800
BUSY
ALL SCANNING
Selecting Scanning Band
“ALL BAND” scans both the COM and NAV bands
between 108.000MHz and 136.975MHz. “COM
BAND” scans the COM band between 118.000MHz
and 136.975MHz. “NAV BAND” scans the NAV band
between 108.000MHz and 117.975MHz.
1.
Press the
[
MENU
]
key to display the
MENU
screen .
2. Select
“
SETUP
” on the screen by pressing the
[
◄
]
or
[
►
]
key, and then press the
[
ENT
]
key.
3. Select “
COMM SETUP
” on the screen by pressing
the
[
◄
]
or
[
►
]
key, and then press the
[
ENT
]
key.
4.
Select “
SCAN BAND
”
on the screen by press-
ing the
[
◄
]
or
[
►
]
key, and then press the
[
ENT
]
key.
EMERGENCY CALL
ANL
WEATHER ALERT
SCAN BAND
PTT SCAN STOP
SCAN RESUME
SCAN STOP TYPE
DUAL WATCH FREQ.
COMM SETUP
5. Select the desired scan
operation by pressing
the
[
◄
]
or
[
►
]
key, and
then press the
[
ENT
]
key.
ALL BAND /
COM BAND /
NAV BAND
SCAN BAND
ALL BAND
COMM BAND
NAVI BAND
COMM SETUP
The setting will be determined and the display will
return to the
COMM SETUP
menu.

Yaesu FTA-550L Specifications

General

Brand	Yaesu
Model	FTA-550L
Category	Transceiver
Language	English