10
Function Menu Screen
Press the [FUNC] key to display the currently available function screens.
Access the functions just by pressing a number on the numeric keypad of the desired function listed on the display.
Press the [FUNC] key
While receiving the current frequency, periodically checks the frequency
that is set as priority in the COMM Setup menu. (page 76)
Starts scanning from the current frequency or channel. (Page 55)
Press the PTT switch to transmit at the split frequency set in the COMM
Setup menu. (Page 43)
The location information of this station as received from the built-in GPS
is saved in the internal memory at regular intervals. (Page 74)
Press the [BACK]
key to return to the
previous screen.
Select a destination or route and start a new navigation. (Page 64)
Display the route display screen during route navigation. (Page 62)
Exit the navigation and display the compass screen. (Page 63)
Starts navigation back to the starting point of the current navigation.
(Page 63)
Set the course azimuth with OBS (omni bearing selector) on the VOR
screen. (Page 40)
To Next Page
Loading...
Need help?
General
