Yaesu FTA-850L User Manual

85
Summary of the SETUP Menu
z Memory Book
Item Description Default Value
New Adding new channels or
destinations
−
Edit Editing the stored informa-
tion
−
Delete Deleting the stored channel
or destination
−
Group Name Editing the group name GP1:GROUP1
GP2:GROUP2
GP3:GROUP3
GP4:GROUP4
GP5:GROUP5
GP6:GROUP6
GP7:GROUP7
GP8:GROUP8
GP8:GROUP9
z COMM Setup
Item Description Default Value
Emergency
Call
Turning on/o󰀨 the emergen-
cy call
ON
ANL Turning on/o󰀨 the automatic
noise limiter
OFF
Noise Cancel TX Mode OFF
RX Mode (4 level) OFF
Weather Alert Turning on/o󰀨 the weather
alert
OFF
Scan Band Selecting the scanning
band
ALL Band
PTT Scan Stop Turning on/o󰀨 the scan stop
with the PTT
ON
Item Description Default Value
Scan Resume Setting the scan resume
time
3 sec
Scan Stop
Type
Setting the operation after
stopping a scan
Busy Stop
Dual Watch
Freq.
Setting the polled frequency
for dual watch
−
Split Frequency Setting the transmit
frequency during the NAV
band reception
−
Frequency
Step
Setting the frequency step
for tuning
25 kHz
TX TOT Setting the time-out timer
for transmission
5 min
Mic Select Setting the microphone
conguration
INT Mic
Side Tone Setting the side tone opera-
tion
OFF
AF Pitch Cont. Setting the audio lter of the
receiver
Normal
VOX Turning on/o󰀨 the VOX
operation
OFF
VOX Level Setting the sensitivity of the
VOX system
Level2
VOX Delay Setting the sensing time of
the VOX system
1.5sec

Yaesu FTA-850L Specifications

General

Brand	Yaesu
Model	FTA-850L
Category	Transceiver
Language	English