Yaesu FTA-850L User Manual

43
z Reading the CDI
 The course deviation needle moves to the right if
your aircraft is o󰀨 course to the left of the runway,
or moves to the left if your aircraft is o󰀨 course to
the right of the runway.
 The height deviation indicator moves up if your
aircraft ies lower than the ideal altitude, or moves
down if your aircraft ies higher than the ideal
altitude.
N
3
33
15
21
6
30
12
24
E
W
S
N
3
33
15
21
6
30
12
24
E
W
S
N
3
33
15
21
6
30
12
24
E
W
S
N
3
33
15
21
6
30
12
24
E
W
S
Right
(LOC)
Left
(LOC)
High
(GS)
Low
(GS)
N
3
33
15
21
6
30
12
24
E
W
S
On course
CDI Examples Corresponding to Aircraft Location
(Runway is to be at the back of the screen)
Split Operation
The split operation feature allows you to transmit a
call to a ight service station using the COM band
frequencies, while receiving a station in the NAV
band. VOR stations equipped with this capability
typically are shown, on navigation charts, with the
voice calling frequency in parenthesis above the
navigation frequency.
z Programming a transmit frequency
1. Press and hold the
[
MENU
]
key to display the
SETUP menu screen.
2. Select “COMM Setup” on
the screen by pressing the
[
▲
]
or
[
▼
]
key, and then
press the
[
ENT
]
key.
3. Select “Split Frequency”
on the screen by pressing
the
[
▲
]
or
[
▼
]
key, and then
press the
[
ENT
]
key.

Yaesu FTA-850L Specifications

General

Brand	Yaesu
Model	FTA-850L
Category	Transceiver
Language	English