27FT-891 Operating Manual
Begin Using Your New Transceiver
Turning the Transceiver ON and OFF
1. To turn the transceiver ON, press and hold
the
[
PWR/LOCK
]
key for one second.
2. To turn the transceiver OFF, again press and
hold the
[
PWR/LOCK
]
key for one sec-
ond.
Adjusting the Audio Volume Level
Rotate the
AF knob to set a comfortable lis-
tening level.
Operating Band and Mode Selection
Follow the below instructions to easily select the Amateur Bands and preset modes.
Frequencies outside the Amateur Bands may only be received
(
No Transmit
)
.
1. Press the
[
BAND
(
MODE
)]
key.
The “BAND SELECT” screen will appear in
the display.
2. Rotate the DIAL knob to select the desired
operating band.
The selections available are:
...ó 1.8 MHz ó 3.5 MHz ó
ó 7.0 MHz ó 10 MHz ó 14 MHz ó
ó 18 MHz ó 21 MHz ó 24 MHz ó
ó 28 MHz ó 50 MHz ó...
NOTE: When the desired operating Band is
selected, the display will automati-
cally return to normal operation after
0.5 second.
To Next Page
Loading...
Need help?
General
