Dash Instrument Display System
The instrument display system is composed of a water
temperature sensor, oil temperature sensor, fuel
sensor, oil pressure switch, (on Diesel equipped
forklifts), oil-water separators and other components.
Its function is to detect the operation of the forklift truck
and displays it through the display. This allows the
operator to understand the status of the forklift .
Lighting, sound and alarm system
The system includes a variety of lighting equipment,
signal lights, horn, buzzer, and other components.
Front
combinatio
n lamp
Front
combinatio
n lights
Rear
combinatio
n light
Warning
light
turning width width brake reverse
steering
turning
Power (W) 27 10 10 5 21 21 10 21
ELECTRICAL BOX
The electrical box houses fuses and relays. The fuses
are used to protect the circuits to prevent damage due
to short circuit. The relays are used to expand the
switch capacity, making the small-capacity switch able
to control high-power electrical items.
BATTERY
For truck with a maintenance-free battery, pay
attention to the following:
1. When installing and maintaining, do not touch the
conductor of the battery. This may cause serious
burns.
2. When charging the battery, the positive and
negative terminals can not be reversed. This will
cause high temperature, burning, fumes or
explosion.
3. When performing the battery routine
maintenance, wear goggles, rubber gloves and
rubber shoes.
4. The battery will produce flammable gas, therefore
potential risk of explosion exists. It is necessary to
avoid short circuits, spark occurrence, and any
source of flame.
5. Prohibit contact with the battery. The battery
electrolyte is dilute sulfuric acid. If contacted with
the skin, please immediately rinse affected area
with water. If contacted with the eyes, rinse
intensively with water and see a doctor as early
as possible.
8000 YRM 2199 Electrical System
65
To Next Page
Loading...
Need help?
General
