122 PSR-A3000 Owner’s Manual
The instrument has a variety of settings for Style playback which can be accessed in the display below.
1 Call up the operation display.
[FUNCTION] TAB [E] MENU 1 [G] STYLE SETTING
2 Use the [C] and [1 ]–[8 ] buttons for each setting.
Style Playback Related Settings
[C] STOP ACMP When [ACMP] is turned on and [SYNC START] is off, you can play chords
in the chord section of the keyboard with the Style stopped, and still hear
the accompaniment chord. In this condition—called “Stop Accompani-
ment”—any valid chord fingerings are recognized and the chord root/type
are shown in the display. Here, you can determine whether the chord played
in the chord section will sound or not in the Stop Accompaniment status.
OFF: The chord played in the chord section will not sound.
STYLE: The chord played in the chord section will sound via the Voices
for the Pad channel and the Bass channel of the selected Style.
FIXED: The chord played in the chord section will sound via the specified
Voice, regardless of the selected Style.
NOTE When the selected Style contains MegaVoices, unexpected sounds may result when this is set to
“STYLE.”
NOTE When you record a Song, the chord detected by playing the Stop Accompaniment can be recorded
regardless of the setting here. Please note that both the sounding Voice and chord data is recorded when
set to “STYLE,” and only the chord data is recorded when set to “OFF” or “FIXED.”
[1 ]/
[2 ]
DYNAMICS
CONTROL
This determines how the Style playback volume changes depending on the
playing strength.
OFF: The volume is kept the same regardless of playing strength.
NARROW: The volume changes over a narrow range.
MEDIUM: The volume changes over a medium range.
WIDE: The volume changes over a wide range.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
