184 PSR-A3000 Owner’s Manual
This instrument features six Effect Blocks, giving you powerful tools to richly enhance the sounds of the instrument
or completely transform them. The Effects are divided into the following groups:
Reverb, Chorus:
The Effects of these Blocks are applied to the overall sound or all Parts. In each of these Effect Blocks, you can
select only one Effect Type at a time and adjust the Send Level (Depth) for each Part as well as the Return Level for
all Parts.
DSP1:
When the “Connection” parameter is set to “System” in step 2 of page 186, the Effects of this Block are applied
only to the Style and Song sounds. In this status, you can select only one Effect Type at a time and adjust the Send
Level (Depth) for each Part as well as Return Level for all Parts. When the “Connection” parameter is set to
“Insertion,” the Effect of this Block is applied to a specific channel of the Style and Song.
DSP2-4:
The Effects of these Blocks are applied to a specific Part or Channel, with the exception of the Multi Pads. Different
Effect Types can be selected for each of the available Parts or Channels.
Adjusting the Effect Depth for Each Part
Use the [B]–[E] or [G]–[J] buttons to select the desired Effect Block, then use the [1 ]–[8 ] buttons to
adjust the Effect Depth for each Part.
Selecting an Effect Type for each Block
This section covers how to change the Effect Type of each Effect Block. The settings here can be saved to a
Registration Memory, Song or Style.
1 Call up the desired page from PANEL, STYLE or SONG by pressing the [MIXER/EQ]
button, repeatedly, if necessary.
Editing EFFECT Parameters
To Next Page
Loading...
Need help?
General
Weight and Dimensions
