PSR-A3000 Owner’s Manual 87
Registration Memory – Saving and Recalling Custom Panel Setups –
7
The saved Registration Memory Bank files can be recalled by using the REGIST
BANK [-]/[+] buttons or the following procedure.
1 Press the REGIST BANK [+] and [-] buttons simultaneously to
call up the REGISTRATION BANK Selection display.
2 Press one of the [A] – [J] buttons to select a Bank.
You can also use the REGIST BANK [-]/[+] buttons, or the Data dial and the
[ENTER] button to select a Bank.
3 Press one of the green-lit numbered buttons ([1] – [8]) in the
Registration Memory section.
Recalling a Registered Panel Setup
• When recalling the setups including
file selection of Song, Style, text,
etc. from a USB flash drive, make
sure that the appropriate USB flash
drive including the registered Song/
Style is connected into the [USB TO
DEVICE] terminal.
• Before using a USB flash drive, be
sure to read “Connecting USB
Devices” on page 95.
Turning the [FREEZE] button on lets
you disable recall of specific item(s) as
desired. For instructions, refer to
page 177.
Confirming the Registration Memory Information
In the REGISTRATION BANK Selection display, press the [6 ] (INFO)
button to call up the Information window, showing which Voices and Style are
memorized to the [1] – [8] buttons of a Registration Memory Bank.
Make sure that MENU 1 is shown at the bottom right corner of the display (page 26).
If a Voice name is shown in gray, this indicates that the corresponding Voice part is turned off when pressing the
REGISTRATION MEMORY [1] – [8] buttons.
To close the window, press the [F] (CLOSE) button.
Advanced Features
Refer to the Advanced Features section in this manual, Chapter 7.
Disabling recall of specific items (Freeze):
[FUNCTION] TA B [ E] MENU 1 [C] REGIST
SEQUENCE/FREEZE TAB [F] FREEZE
Calling up Registration
Memory numbers in order (Registration
Sequence):
[FUNCTION] TA B [ E] MENU 1 [C] REGIST
SEQUENCE/FREEZE TAB [E] REGISTRATION
SEQUENCE
To Next Page
Loading...
Need help?
General
Weight and Dimensions
