PSR-A3000 Owner’s Manual 181
8
9
Oriental Scales / Mixing Console
8
9
Oriental Scales
This function is fully explained in the Basic Operations section. Refer to page 88.
Mixing Console
Regarding the Mixing Console, the Advanced Features section covers detailed descriptions of each parameter while
the Basic Operations section covers the basic instructions including the Save operation. You can edit various parame-
ters for the Parts called up via the [MIXER/EQ] button, then save your edits for future recall.
For a visual indication of the signal flow and configuration of the Mixing Console, refer to the Block Diagram on
page 190.
Use the TAB [E]/[F] buttons to select the various pages that follow.
Editing VOL/VOICE Parameters
[B]/[C]/
[G]/[H]
VOICE Allows you to re-select the Voices for each part.
NOTE Note the following operation limitations.
• For each Style channel, you can select the Voices for recording on pages 127 and 128.
• For each Style or Song channel, you cannot select Voices in the USER drive.
• For each Multi Pad, you cannot change the Voice.
• When a GM Song is selected, only a Drum Kit Voice can be selected for channel 10 (in the SONG
CH9-16 page).
NOTE For a Style or Song channel, calling up a rhythm/percussion Voice (Drum Kit, etc.) will replace the chan-
nel settings with those for the new Voice. In such a case, the original settings may not be restored even if
you re-select the original Voice. To restore the original sound, select the same Style or Song again with-
out carrying out the Save operation.
[D]/[I] PANPOT Determines the stereo position of the selected part (channel).
[E]/[J] VOLUME Determines the volume of each part or channel, giving you fine control over
the balance of all the parts.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
