PSR-A3000 Owner’s Manual 89
Oriental Scales – Setting Original Scales –
8
2 While holding the SCALE MEMORY [MEMORY] button, press
one of the SCALE MEMORY [1] – [5] buttons (the desired one for
memorizing the scale settings).
The corresponding SCALE MEMORY button lights. Any data that was
previously in the selected location is erased and replaced by the new settings.
3 Memorize scale settings to other buttons by repeating steps 1
and 2.
The memorized settings can be recalled by simply pressing the desired number
button.
The scale settings memorized to the SCALE MEMORY [1] – [5] buttons can be saved as a single Scale Tune Bank
file.
1 Press the [DIRECT ACCESS] button, followed by the [EXIT]
button to call up the Main display.
About the lamp status of the [1] – [5] buttons
• On: Data registered and currently selected
• Off: No data registered, or not currently selected
The [RESET] button lights up when all notes are of normal pitch.
The scale settings memorized to
the numbered button will be lost
if you turn the power to the
instrument off without carrying
out the Save operation (see
below).
Instantly resetting the Scale Settings
Pressing the SCALE MEMORY [RESET] button can reset all notes to normal
pitch (0 cent). This operation does not erase the settings memorized to the [1] –
[5] buttons.
Saving the Scale Memory as a Bank File
Bank 01
Bank 02
Bank 03
Bank 04
To Next Page
Loading...
Need help?
General
Weight and Dimensions
