44 PSR-A3000 Owner’s Manual
Echo Category (Echo, Tremolo, Trill)
The Echo, Tremolo or Trill effect is applied to the note played in the right-hand
section of the keyboard in time with the currently set tempo, regardless of the
[ACMP] and the LEFT part on/off status. Keep in mind that Trill works when
you hold down two notes on the keyboard simultaneously (or the last two
notes, if more than two notes are held), and it plays those notes alternately.
3 Play the keyboard.
The effect selected in step 2 is applied to the right-hand melody.
To turn off the effect, turn the [HARMONY/ARPEGGIO] button off.
The Arpeggio function lets you play arpeggios (broken chords) by simply pressing the notes of the chord. For
example, you could play the notes C, E and G to trigger interesting phrases. This feature can be used for music
production as well as performance.
1 Turn the [HARMONY/ARPEGGIO] button on.
2 Select the desired Arpeggio type.
2-1 Call up the operation display.
[FUNCTION] TAB [E] MENU 1 [B] HARMONY/ARPEGGIO
2-2 Use the [1 ] – [3 ] buttons to select a category other than
“Harmony” and “Echo.”
2-3 Use the [4 ] – [6 ] buttons to select the desired type.
You can set the Arpeggio volume and select the part for playing the Arpeggio in
the display called up via the [7 ] (DETAIL) buttons. For details, refer to the
Advanced Features section (page 106).
3 Play a note or notes to trigger the Arpeggio.
The arpeggiated phrase differs depending on the notes played.
To turn off the effect, turn the [HARMONY/ARPEGGIO] button off.
Triggering Arpeggios with Your Right Hand
When you select another Voice, the
Harmony/Echo/Arpeggio type is auto-
matically set to the default which is
memorized as the Voice Set. For
details on the Voice Set function, refer
to page 113.
By using the Arpeggio Quantize func-
tion, Arpeggio playback can be syn-
chronized with Song/Style playback,
allowing any slight imperfections in
the timing to be corrected. This can be
set in the display: [FUNCTION]
TAB [E] MENU 1 [J] UTILITY
TAB [E][F] CONFIG 2.
2-2 2-3
Arpeggio playback can be continued
even after the note has been released,
by assigning the Arpeggio Hold func-
tion to the footswitch. For instructions,
refer to page 193.
You can control the Arpeggio volume
and the length of each note by using
the joystick. For instructions on how to
assign the functions to the joystick,
refer to page 40.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
