Yamaha QY20 User Manual

98
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
6 Creating Original Patterns
Copies a specified track (C1, C2, Ba, Dr, or
All) from one pattern to the specified track in a
user pattern. The section to be copied can also
be specified when a preset pattern is the source.
After setting the parameters as required, press
[
ENTER
]
. “Are you sure?” will appear on the
display. Press
[
+1/YES
]
to confirm that you
want to go ahead with the copy operation
(which will overwrite data in the destination
track), or press
[
−1/NO
]
to cancel.
MUSICAL
NOTE
The Copy Pattern job makes it possible to use tracks from other patterns as
“building blocks” to create new patterns. You can, for example, combine differ-
ent tracks from different preset patterns to create a completely new “hybrid”
pattern. Of course, you can also copy just one or two existing tracks and record
the remaining tracks yourself. Copied tracks can be edited using the edit mode
(page 140) to fit them to the pattern you are creating.
DETAIL
Depending on the selected pattern, some voices may not sound if a preset
pattern is copied to a user pattern.
–
1
+
1
NO YES
ENTER
Press
[
− 1/NO
]
to cancel.
1: Copy Pattern
Destination track
(C1, C2, Ba, Dr, or All).
Source track
(C1, C2, Ba, Dr, or All).
Source pattern
number (001 … 200).
Section (only available
in preset patterns).
Destination pattern
number (101 … 200).

Yamaha QY20 Specifications

General

Brand	Yamaha
Model	QY20
Category	Recording Equipment
Language	English