CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 80
Setup menu items
Menu Item Function Page
Speaker
Auto Setup Automatically optimizes the speaker settings (YPAO). 34
Manual Setup
Power Amp Assign Selects a speaker system. 82
Configuration
Front Selects the size of the front speakers. 82
Center Selects whether or not a center speaker is connected and its size. 82
Surround Selects whether or not surround speakers are connected and their size. 82
Surround Back Selects whether or not surround back speakers are connected and their size. 83
Front Presence Selects whether or not presence speakers are connected. 83
Subwoofer Selects whether or not a subwoofer is connected and its phase. 83
Extra Bass Sets the speakers to produce the front channel low-frequency components. 83
Bass Cross Over Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. 83
Distance Sets the distance between each speaker and listening position. 84
Level Adjusts the volume of each speaker. 84
Parametric EQ Adjusts the tone with an equalizer. 84
Test Tone Enables/disables the test tone output. 84
Sound
Lipsync
Delay Enable Enables/disables the Lipsync adjustment for each input source. 85
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 85
Adjustment Adjusts the delay between video and audio output manually. 85
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 85
Max Volume Sets the maximum volume to prevent excessive loudness. 85
Initial Volume Sets the initial volume for when this receiver is turned on. 86
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level when the volume is adjusted. 86
Video Video Mode Enables/disables the video signal processing (resolution and aspect ratio). 86
HDMI
HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 87
Audio Output Selects a device to output audio. 88
Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 88
To Next Page
Loading...
Need help?
General