Yamaha XVS650 User Manual

_-+-+00__ 1.5 mm
I:B707030
FINAL GEAR BACKLASH MEASUREMENT
1.Secure the final drive gear case in a vise
or a similar supporting device.
2.Remove:
• Drain plug
Drain the oil.
3.1nstall:
• Specified bolt
<D
(into the drain plug hole)
4.Finger tighten the
bolt until it holds the
ring gear.
NOTE: _
Do not overtighten the bolt; just finger-
tighten it.
• Position mark
®
. Final gear backlash band:
YM
.. 01231,90890 .. 01231
5.Attach:
• Final gear backlash band
CD
• Dial gauge ®
NOTE: _
Measure the final gear backlash at four
positions. Rotate the final drive shaft 90°
each time.
6.Measure:
• Final gear backlash
Gently rotate the final drive gear coupling
from engagement to
engagement
Over the specified lim it ~ Adjust
Final gear backlash:
0.1 lOw 0.2 'nm (0.004 lOw 0.008 in)
6 - 57

Yamaha XVS650 Specifications

General

Brand	Yamaha
Model	XVS650
Category	Motorcycle
Language	English