Yamaha XVS650 User Manual

AIR BLEEDING (HYDRAULIC BRAKE SYSTEMI/ IINSP I"~ I
SHIFT PEDAL ADJUSTMENT . ADJ, ~ ,
g.Loosen the bleed screw and allow the
lever
to travel towards its limit.
h.Tighten the bleed screw when the lever
limit has been reached, then release the
lever.
i. Repeat steps (e) to (h) until all the air bub-
bles have disappeared
from the brake
fluid.
NOTE: _
When bleeding the brake system, make
sure that there is always enough brake
fluid
in the brake fluid reservoir, before applying
the brake lever. Ignoring this precaution
could allow air
to enter the brake system,
lengthening the bleeding procedure, con-
siderably.
j. Tighten the bleed screw.
~ "'" Bleed screw:
~~ 6 Nm (0.6 m • kg, 4.3 ft • Ib)
NOTE: _
If bleeding is difficult, it may be necessary
to let the brake fluid settle for a few hours.
Repeat the bleeding procedure when the
tiny bubbles in the brake system have dis-
appeared.
k.Fill the brake fluid reservoir
to the proper
level.
Refer to "BRAKE FLUID
LEVEL INSPEC-
TION".
A WARNING
After bleeding the brake system check the
brake operation.
**********************************
EB3040BO
SHIFT PEDAL ADJUSTMENT
1.Check:
• Shift pedal position
Check the
shift pedal rod length ®.
If the position is incorrect ~ Adjust.
Shift pedal rod length:
188 mm (7.4 in)
3 - 28

Yamaha XVS650 Specifications

General

Brand	Yamaha
Model	XVS650
Category	Motorcycle
Language	English