,
~
::::::::J
r
f-J
5-5
CARBURETOR
ICARBIIiII
5.1
nspect:
• Vacuum chamber cover
<D
• Springs ®
• Plastic bushing ®
• Plastic screw cap @
Cracks/damage
~
Replace.
6.1nspect:
• Jet needle
<D
• Main jet ®
• Main jet holder ®
• Pilot
jet@
• Needle jet ®
• Pilot air jet ®
• Pilot screw (j)
• Starter plunger
Bends/wear/damage
~
Replace.
Blockage
~
Blowout
the jets with com-
pressed air.
7.Check:
•
Free
movement
Insert the throttle valve into the carbure-
tor
body and check for free movement.
Sticks/tight
~
Replace.
8Jnspect:
• Joints (fuel)
Q)
• Joints (air vent hose-vacuum chamber) ®
• Joints (carburetor breather hose) ®
Cracks/damage
~
Replace.
CARBURETOR
ASSEMBLY
Before reassembling, wash all of
the
parts
in
a clean petroleum based solvent.