User Guide for T4 Series IP Phones
148
Transfer Mode
Configuring Call Park Feature in Transfer Mode
Procedure:
1. Click Features->Pick up & Park.
2. Select Transfer from the Call Park Mode field.
3. Select Enabled from the Call Park field.
If Enabled is selected, the Park soft key will display on the LCD screen during a call, and
the Retrieve soft key will display on the dialing screen.
4. Enter the call park code in the Call Park Code field.
It is configured for the Park soft key. This call park code will also apply to the call park key.
5. Enter the park retrieve code in the Park Retrieve Code field.
It is configured for the Retrieve soft key. This park retrieve code will also apply to the
retrieve park key.
6. Click Confirm.
Note
Parking a Call in Transfer Mode
Procedure:
1. During a call, press Park (You may need to press the More soft key to see the Park soft
key).
The call will be directly transferred to the shared parking lot.
If the Park or Retrieve soft key doesn’t appear on the LCD screen, please select Disabled from
the pull-down list of Custom Softkey via web user interface at path Settings->Softkey
Downloaded from ManualsNet.com search engine