Yealink VS800 User Manual

| Configuring Basic Settings | 103
Parameter Description Configuration Method
Manual Time/Time Type Select Off/SNTP Setting to
obtain the time and date from the
NTP server automatically.
Web user interface
Endpoint
CTP20
DHCP Time
Enable or disable the system to
update time with the offset time
offered by the DHCP server.
Note: the default value is Off. It
is only available when the time
zone is GMT 0.
Web user interface
Time Zone
Configure the time zone. For
more information on available
time zone, refer to Expand-Time
zone.
Default: +8China (Beijing).
Web user interface
Endpoint
CTP20
NTP Primary Server/Primary
Server
Configure the NTP primary
server.
Default: cn.pool.ntp.org.
Web user interface
Endpoint
CTP20
NTP Secondary Server/
Secondary Server
Configure the NTP secondary
server.
Default: cn.pool.ntp.org.
Web user interface
Endpoint
CTP20
Synchronism (15~86400s)
Configure the interval (in
seconds) to update time and date
from the NTP server.
Default: 1000.
Web user interface
Configuring the DST
You can set Daylight Saving Time (DST) for the system according to the location. By default, the DST is set to
Automatic, so it can be adjusted automatically from the current time zone configuration.
Procedure
1.
Do one of the following:
• On your web user interface, go to Setting > Date & Time.
• On your VCS, go to More > Setting > Basic > Date & Time.
On your VP59, tap Setting > Basic > Date & Time.
• On your CTP20, tap Setting > Basic > Date & Time.
2.
Configure and save the following settings:

Yealink VS800 Specifications

General

Brand	Yealink
Model	VS800
Category	Conference System
Language	English