EasyManuals Logo

Yealink VS800 User Manual

Yealink VS800
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
| Configuring Network Settings | 70
• On your web user interface, go to Network > NAT/Firewall > Reserved Port.
• On your VCS:
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > NAT/Firewall >
Reserved Port.
On your VC200, go to More > Network > Wired Network > NAT/Firewall > Reserved Port.
On your VP59, tap Setting > Advanced > NAT/Firewall > Reserved Port.
• On your CTP20, tap Setting > Advanced > NAT/Firewall > Reserved Port.
2.
Configure and save the following settings:
Parameter Description Configuration Method
UDP Port Scope/
UDP Lowest Port—UDP
Highest Port
Configure the range of the UDP
ports.
Note: the default UDP port
range is from 50000 to 51000.
The valid value is from1024 to
65000.
SIP and H.323 calls share the
configured ports. If you change
this parameter, the system will
reboot to make the change take
effect.
Web user interface
Endpoint
CTP20
TCP Port Scope/
TCP Lowest Port—TCP
Highest Port
Configure the range of the TCP
ports.
Note: the default TCP port
range is from 50000 to 51000.
The valid value is from1024 to
65000.
SIP and H.323 calls share the
configured ports. If you change
this parameter, the system will
reboot to make the change take
effect.
Web user interface
Endpoint
CTP20
Quality of Service (QoS)
Video conferencing system is subject to the bandwidth and the delay. Therefore, the QoS is very important for the
network having limited bandwidth. QoS is a major issue in VoIP implementations, regarding how to guarantee that
packet traffic is not delayed or dropped due to interference from other lower priority traffic. Your system supports the
DiffServ model of QoS.
Audio QoS
The loss of audio packets, the delay and so on may cause poor audio quality. To solve this, you can configure DSCP
priority for the audio packets.
Video QoS
Some issues, such as the video packet loss and delay may cause the video images distorted and unclear. To ensure
acceptable visual quality for video, video packets emanated from the system should be configured with a high
transmission priority.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VS800 and is the answer not in the manual?

Yealink VS800 Specifications

General IconGeneral
BrandYealink
ModelVS800
CategoryConference System
LanguageEnglish

Related product manuals