| Configuring Video Settings | 139
Parameter Description Configuration Method
Frame
Configure the maximum frame
rate of the video.
• 5fps
• 15fps
• 30fps
• 60fps—this option appears
only when you enable 60fps.
Default: 30fps.
Web user interface
Main->Resolution
Configure the maximum
resolution of the video.
• 1080P
• 720P
Default: 1080P.
Web user interface
Note:
If both parties do not use H.265 codec, and choose to use WDR exposure mode and 60fps, the call will
switch to auto exposure mode automatically. For more information, refer to Adjusting the White Balance.
Maximizing Monitor Video Display
You monitor may not display the entire HD image. To solve this problem, you can adjust the monitor to display entire
HD image manually. This feature is not applicable to VP59.
Procedure
1.
Do one of the following:
• On your VCS, go to More > Setting > Basic > Display.
• On your CTP20, tap Setting > Basic > Display.
2.
Use left or right navigation key to adjust the Display(90%-100%) slider.
3.
Save the change.
Configuring the Monitor Resolution
You can specify the resolution for the monitor.
Procedure
1.
Do one of the following:
• On your web user interface, go to Setting > Video & Audio > Output Resolution.
• On your CP960 conference phone, go to Setting > Display > Output Resolution.
2.
Configure and save the following settings:
To Next Page
Loading...
Need help?
General
