Yealink VS800 User Manual

| Configuring Account Settings | 87
On your VP59, go to Setting > Advanced > Video Conference Platform.
• On your CTP20, go to Setting > Advanced > Video Conference Platform.
2.
Configure and save the following settings:
Parameter Description Configuration Method
Cloud Account
Enables the Cloud feature.
Note: if it is set to Off, your
device cannot log into the Zoom
Cloud Platform.
Web user interface
Endpoint
CTP20
Platform Type Select Zoom.
Web user interface
Endpoint
CTP20
Server/
Server Host
The IP address or the domain
name of the Zoom server.
Default: zoomcrc.com
Web user interface
Endpoint
CTP20
Transport
Specify the transport protocol
for transmitting the SIP
signaling.
The supported protocols are as
follows:
• UDP—it provides the
best transmission for SIP
signaling.
• TCP—it provides a reliable
transmission for SIP
signaling.
• TLS—it provides a safe
transmission for SIP
signaling. TLS is available
only when the device is
registered on a SIP server
that supports TLS.
• DNS-NAPTR—the device
performs the DNS NAPTR
and SRV request to find the
service type and the port if
no server port is given.
Default: TCP.
Web user interface
Server Expires
The registration timeout (in
seconds) of the device.
After the timeout, the device will
send the registration request to
the server again.
Default: 3600.
Web user interface

Yealink VS800 Specifications

General

Brand	Yealink
Model	VS800
Category	Conference System
Language	English