Yealink W80 User Manual

| Getting Started | 33
About this task
It is not applicable to DD phones.
Procedure
1. Go to OK > Settings > Display > Input Method.
On the CP930W, go to Menu > Settings > Basic Settings > Display > Input Method.
2. Select the desired input mode and then select Change.
Related information
Appendix B - Input Modes and Characters
Entering Data on the W56H/W53H
The following table describes how to enter different characters using the keypad keys:
Task Action
Switch among input
modes.
Press to switch among input modes.
The current input mode is displayed at the right bottom of the phone screen.
Enter letters. Press a key one or more times (depending on what input mode you’re in) to
enter the possible characters that are displayed on the keypad key.
Enter special characters.
Press to enter the space character or the following special characters: _’ ”
= / \ ^ ; : , . - + * # § % & @ ? ! ¿ ¡ ( ) { } [ ] < > ¥
￡
$ | ~ ¤
Press :
• If it is in the uppercase (ABC), uppercase and lowercase (Abc) or
lowercase (abc) input modes, it will provide space character and the
following special characters: . , ? ! 0
• If it is in the numeric (123) input mode, it will only provide the digit 0.
• Long press the key to enter the character +.
Delete the text.
Press or to position the cursor to the right of the text you want to delete,
and then press Delete to delete one character at a time or long press to
delete all characters.
Entering Data on the CP930W/DD Phone
The following table describes how to enter different characters using the keypad keys.
Task Action
Switch input modes Press the ABC, abc, Abc, 2aB, or 123 soft key to switch the input modes.
Enter letters
Select ABC, abc, 2aB, or Abc mode.
On the DD phones, press the keys labeled with letters until your desired
letter appears.
On the CP930W, press a keypad key repeatedly to view the character
options and stop when the letter you want to enter is displayed in the field.
Wait one second, and then enter the next letter.
Enter numbers Select 123 mode and press the corresponding keys.

Yealink W80 Specifications

General

Power Saving Mode	Yes
Concurrent Calls	8
Power over Ethernet (PoE)	Yes (802.3af)
Operating Temperature	0°C to 40°C
Maximum Number of Base Stations	8
Maximum Number of Concurrent Calls	8
Handset Display	2.4" Color LCD
Indoor Range	Up to 50 meters
Outdoor Range	Up to 300 meters
Audio Codecs	G.722, G.729
Base Stations Support	Yealink W80B
Display	2.4" Color LCD
Supported Codecs	G.722, G.729
Humidity	10% to 90% (non-condensing)
Security	Encryption (AES-128)