| Call Features | 35
• Press the Reg soft key on the handset to register quickly.
• Press OK > Register Handset and then select the desired base to register the handset.
• Go to OK > Settings > Registration > Register Handset and then select the desired base to register
the handset.
After registration, the handset prompts “Handset Subscribed”.
Note: The default base PIN is 0000.
Selecting a System to Connect
You can connect the handset to a desired system manually, or allow the handset to connect the registered
system with the greatest signal strength automatically.
About this task
It is only applicable to W56H/W53H.
Procedure
1. Go to OK > Settings > Registration > Select Base.
The phone screen displays all systems that the handset is registered to and the BestBase option.
2. Select the desired system or BestBase, and then press Select.
Call Features
You can use the phone to place and answer calls, ignore incoming calls, transfer a call to someone else,
conduct a conference call and perform other basic call features.
• Placing Calls
• Answering Calls
• Disabling Call Waiting
• Silencing or Rejecting Incoming Calls
• Ending Calls
• Muting/Unmuting Audio
• Holding and Resuming Calls
• Call Forward
• Transferring Calls
• Conference Calls
• Recording Using an SD Card
Placing Calls
After the handset is registered successfully, you can use your handset to place an external call.
The handset can keep 2 calls at one time at almost, one (associated with the audio) active and the other
one on hold.
• Placing External Calls
• Placing a Call from the Call History
• Placing a Call from the Directory
To Next Page
Loading...
Need help?
General
