| Audio Settings | 74
Setting the Ring Tone for the External Calls
You can select a unique ring tone for the external calls so that you can identify callers when the phone
rings.
Procedure
1. Go to OK > Settings > Audio > Ring Tones > Melodies.
On the CP930W, go to Menu > Settings > Basic Settings > Sound > Ring Tones.
On the DD phone, go to Menu > Settings > Basic Settings > Sound > Ring Tones > Common.
2. Select the desired ring tone.
The ring tone is played automatically.
3. Confirm the action.
Silent Charging
With the silent mode, you can silence your phones when charging but still get messages. When you finish
charging, the phone will be unmuted automatically. It is not applicable to DD phones/CP935W.
Procedure
1. Go to OK > Settings > Audio.
On the CP930W, go to Menu > Settings > Basic Settings > Sound.
2. Press Change to select the Silent Charging check box.
Setting the Advisory Tone
Advisory tones are the acoustic signals of your handset, which inform you of different actions and states. It
is not applicable to DD phones.
About this task
You can configure the following advisory tones independently:
• Keypad Tone: plays when you press any key on the keypad.
• Touch Tone: plays when you tap the keys (except the touch keypad). It is only applicable to CP930W.
• Confirmation: plays when a setting is changed or the handset is placed in the charger cradle.
• Low Battery: plays when the battery's remaining capacity is low and the handset needs charging.
Note: If the silent mode is activated, the advisory tones will not play, but you can still see the
alert of low battery on the phone screen.
Procedure
1. Go to OK > Settings > Audio > Advisory Tones.
On the CP930W, go to Menu > Settings > Basic Settings > Sound > Advisory Tones.
2. Select the desired value from the Keypad Tone field.
3. On the CP930W, select the desired value from the Touch Tone field.
4. Select the desired value from the Confirmation field.
5. Select the desired value from the Low Battery field.
To Next Page
Loading...
Need help?
General
