<6. OPERATION OF SC (Conductivity)>
6-2
IM 12A01A02-01E 8th Edition : Oct. 01, 2015-00
6.2 Quick setup
The Quick setup screen is used to set up the basic items you want to set up rst, such as the
date/time and sensor settings. The detailed settings are described in chapter 8, Commissioning.
You may leave the Quick setup now and return to it later; however, it is recommended to perform
the quick setup rst.
Each time the FLXA202/FLXA21 is started up, this screen is displayed. If it is not necessary to
change the setup, press No or
.
NOTE
When no operation is performed for 10 minutes or 60 minutes (depending on the setting of “Auto
Return”), the display except Trend display automatically changes to the Monitor display (or to the
Main display or the Home display when the MONITOR display is disabled).
To Next Page
Loading...
Need help?
General
