YOKOGAWA FLXA21 User Manual

<2. WIRING AND INSTALLATION>
2-5
IM 12A01A02-01E 8th Edition : Oct. 01, 2015-00
2.3 Installing the cable glands
The supplied cable glands are for cables with an outside diameter of 6 to 12 mm (0.24 to 0.47
inches). Unused cable entry holes must be sealed with cable glands including the supplied close
up plugs.
(A hole is drilled, if specified.)
FLXA21 Plastic Housing
FLXA202 Housing
FLXA21 Stainless Steel Housing
(For sensor 2 cable)
For sensor 1 cable
(For sensor 2 cable)
For sensor 1 cable
For power supply
For sensor 1 cable
(For sensor 2 cable)
For power supply
For power supply
For grounding cable
F0202.ai
(Functional ground)
Figure 2.5 Cable gland diagram
CAUTION
Be careful not to be injured by the sharp hole edges on the housing.
Install the supplied cable gland as shown in Figure 2.6. When using an adapter for conduit work,
see Figure 2.7.
PH
SC
ISC
DO
SENCOM
2

YOKOGAWA FLXA21 Specifications

General

Brand	YOKOGAWA
Model	FLXA21
Category	Measuring Instruments
Language	English