AF6ZP0CA – COMBIAC0 & ACE0 2uC – User Manual Page – 149/155
MAIN MENU contains the complete list of menus available in the controller.
Contrary to Console Ultra there are no “hidden” menus which must be reached by
pressing many buttons all at once: now all menus are visible.
Use UP and DOWN keys to navigate the list: once you find the desired menu
press OK to enter it.
13.2.5 How to modify a parameter
From MAIN MENU enter the menu inside that there is the parameter that you
want to change (for example the PARAMETER CHANGE menu).
With UP and DOWN keys you can scroll the whole list: once you have highlighted
the parameter that you want to modify, use LEFT or RIGHT keys to decrease or
increase the parameter value.
4 Keep LEFT/RIGHT button pressed to continuously repeat the value modification
(“auto-repeat” function): this function will speed up the procedure in case many
parameter values must be changed.
You can press ESC to exit the menu at any time. In case some parameter has
been modified, the console will prompt a request to confirm/discard changes.
To Next Page
Loading...
Need help?
General
