Page – 134/139 AFFZP0BB – ACE3 – User Manual
You can press ESC to exit the menu at any time. In case parameters have been
modified, the console will prompt the request to confirm/discard changes.
4 Description above is valid for every menu which contains parameters and options
like SET OPTIONS, ADJUSTMENT, HARDWARE SETTING, etc.
12.2.6 PROGRAM VACC
PROGRAM VACC menu has been slightly modified from old consoles.
Upon entering this menu the console shows the current programmed values.
When OK is pressed, PROGRAM VACC procedure starts. Console invites you:
to select the enable switch, if any;
to select the direction switch (either forward or backward);
to depress the pedal to its maximum excursion.
Displayed values vary accordingly to operator inputs.
To Next Page
Loading...
Need help?
General
