Zapi ACE3 User Manual

AFFZP0BB – ACE3 – User Manual Page – 85/139
8.13 Steering table
Steering table allows to automatically calibrate the rotation applied to the steering
wheels so to obtain the desired steering angle of the truck.
The STEER TABLE parameter defines whether to adopt a custom or predefined
steering table:
 NONE = custom steering table, according to the following parameters:
o WHEELBASE MM: distance between the front axle and the rear axle
of the truck.
o FIXED AXLE MM: axle width of the axle where the fixed wheels are.
o STEERING AXLE MM: axle width of the axle where the steering
wheels are.
All three previous parameters must be expressed in millimeters.
 OPTION#1 = three-wheels predefined steering table.
 OPTION#2 = four-wheels predefined steering table
Geometrical steering-related parameters.

Zapi ACE3 Specifications

General

Brand	Zapi
Model	ACE3
Category	Inverter
Language	English