RS6000 Configuration and Update
103
3. Open the RS507PCTool application.
4. In the Device section, click Open. The virtual COM port assigned to the RS6000 opens and the Device Info
for the RS6000 will be shown.
When the RS6000 is connected to the RS507PCTool, the logger time on the RS6000 is synchronized with the
host computer’s time.
Figure 55 RS507PCTool
5. Click Get Log.
6. The log file is saved in the same directory on the host computer where RS507PCTool application is located.
Figure 56 RS507PCTool Finished Getting Log File
7. The log file name format is RS507Log_D<date&time>.txt
RS6000 Firmware Update
RS6000 devices can be upgraded and re-flashed with a new firmware. The update is performed by downloading
the firmware to the RS6000 flash memory. If download fails, the previous firmware remains operational. The
To Next Page
Loading...
Need help?
General
