Symbologies
206
MSI
Enable/Disable MSI
Parameter # 11 (SSI # 0Bh)
To enable or disable MSI, scan the appropriate bar code below.
Set Lengths for MSI
Parameter # L1 = 30 (SSI # 1Eh), L2 = 31 (SSI # 1Fh)
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for MSI to any length, one or two discrete lengths, or lengths within a specific range.
The default is 4 to 55.
• One Discrete Length - Select this option to decode only MSI symbols containing a selected length. Select
the length using the numeric bar codes in Alphanumeric and Numeric Bar Codes. For example, to decode
only MSI symbols with 14 characters, scan MSI - One Discrete Length, then scan 1 followed by 4. To
correct an error or to change the selection, scan Cancel on page 324.
• Two Discrete Lengths - Select this option to decode only MSI symbols containing either of two
selected lengths. Select lengths using the numeric bar codes in Alphanumeric and Numeric Bar Codes.
For example, to decode only MSI symbols containing either 2 or 14 characters, select MSI - Two Discrete
Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan Cancel
on page 324.
• Length Within Range - Select this option to decode a MSI symbol with a specific length range.
Select lengths using numeric bar codes in Alphanumeric and Numeric Bar Codes. For example, to
decode MSI symbols containing between 4 and 12 characters, first scan MSI - Length Within Range.
Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the
selection, scan Cancel on page 324.
• Any Length - Scan this option to decode MSI symbols containing any number of characters within the
RS6000’s capability.
Enable MSI
(1)
*Disable MSI
(0)
To Next Page
Loading...
Need help?
General
