Bluetooth Communications
42
Figure 14 Touch NFC Antennas
SSI Bluetooth Connection using Scan2Pair
To pair the RS6000 with the WT6000 using SSI:
1. On the WT6000, touch > . The Bluetooth Pairing Utility opens.
Figure 15 Bluetooth Pairing Utility
2. Using the RS6000, scan the bar code on the screen.
The Status LED blinks blue indicating that the RS6000 is attempting to establish connection with the WT6000.
When connection is established, the Status LED turns off and the RS6000 emits a single string of low/high
beeps.
3. On the WT6000, touch the triangle button to return to the main screen.
NOTE: Not all Zebra device support NFC readers and the Tap-to-Pair feature.
To Next Page
Loading...
Need help?
General
