Zebra TC20 Series User Manual

Accessories
129
Figure 104 Install Attachment Plate to Handle
3. Pull the lanyard until the loop tightens.
Inserting the Device into the Trigger Handle
To install the device onto the Trigger handle:
1. Align and insert the top of the device into the front of the Trigger Handle.
Figure 105 Insert Device into Trigger Handle
2. Rotate the device down and press down until it snaps into place.
1
2

Zebra TC20 Series Specifications

General

Brand	Zebra
Model	TC20 Series
Category	Handhelds
Language	English