Parameters 149
19.2 kbps 19.2 kbit/s. 3
38.4 kbps 38.4 kbit/s. 4
57.6 kbps 57.6 kbit/s. 5
76.8 kbps 76.8 kbit/s. 6
115.2 kbps 115.2 kbit/s. 7
58.05 Parity Selects the type of parity bit and number of stop bits.
Changes to this parameter take effect after the control unit is
rebooted or the new settings validated by parameter 58.06
Communication control (Refresh settings).
8 EVEN 1
8 NONE 1 Eight data bits, no parity bit, one stop bit. 0
8 NONE 2 Eight data bits, no parity bit, two stop bits. 1
8 EVEN 1 Eight data bits, even parity bit, one stop bit. 2
8 ODD 1 Eight data bits, odd parity bit, one stop bit. 3
58.06 Communication
control
Takes changed EFB settings in use, or activates silent mode. Enabled
Enabled Normal operation. 0
Refresh settings Refreshes settings (parameters 58.01…58.05, 58.14…58.17,
58.25, 58.28…58.34) and takes changed EFB configuration
settings in use. Reverts automatically to Enabled.
1
Silent mode Activates silent mode (no messages are transmitted).
Silent mode can be terminated by activating the Refresh
settings selection of this parameter.
2
No. Name/Value Description Def/FbEq16
ACQ80 FW.book Page 149 Thursday, February 14, 2019 11:33 AM
To Next Page
Loading...
Need help?
General
