50 EL3060 CONTINUOUS GAS ANALYZERS | OI/EL3060-EN REV. A
Operation – Menu mode
Display in menu mode
Structure of the menus
Starting from the main menu, each menu (see page 52) contains a maximum
of three menu items ("3-point menu"). Each menu option is assigned to one
of the three keys , and ; each menu option can therefore be selected
directly. The button
is used to return to the next higher menu.
The functions which are normally most frequently required are arranged in
the menu in such a way that they can be called by repeatedly pressing the
same button:
Operation Calibration Manual Calibration
Zero Point / Single Point
Setup Calibration Data Test Gas Set Points
Maintenance Diagnosis Device Status Status Messages
Key functions in menu mode
3-point menu
Select menu item
Return to the next higher menu
OK Return to measuring mode (see page 48)
Component list
Select component
or OK Call up selected component for processing
Parameter list ("selector")
Select parameters
Call up change in value
OK Accept all displayed values and
return to the next higher menu
Discard all displayed values and
return to the next higher menu
Change in value
Change selected position
Select position to be changed
OK Confirm altered value and
return to the parameter list
Discard altered value and
return to the parameter list
To Next Page
Loading...
Need help?
General
