ABB HVC User Manual

HVC 450 kW E-Bus Charger Installation Guide
Revision: 1.2 COMPANY CONFIDENTIAL
Date released: 16-08-2018 Page 4 of 128
Table of Contents
1. Introduction 8
1.1. Preface 8
1.2. Intended document users 8
1.3. Signs 8
1.4. Safety regulations 9
1.4.1. Owner responsibilities 9
1.4.2. Tilting and handling 10
1.4.3. Electric hazards 11
1.4.4. Installation safety 11
1.5. Environment and disposal of waste 12
1.6. Contact information 13
2. Description of the product 14
2.1. Overview of the system 14
2.1.1. Standard HVC 450 kW E-Bus Charger with pole 14
2.1.2. Standard HVC 450 kW E-Bus Charger without pole 15
2.1.3. Power Cabinet 16
2.1.4. ACS Control Module 17
2.1.5. Junction Box 18
2.1.6. ABB Pole 18
2.2. Accessories 19
2.2.1. Foundation for Power Cabinet 19
2.2.2. Foundation for ABB Pole construction 20
2.2.3. Communication glass fiber cable 21
2.2.4. Electrical components 21
2.3. Project planning 23
3. Preparation 24
3.1. About preparation 24
3.2. Permits 25
3.2.1. Power connection 25
3.2.2. Construction permit 25
3.2.3. Internet access 25
3.3. Upgrade grid 26
3.4. Location 26
3.5. Geometry of infrastructure 27
3.5.1. Required space for the Power Cabinet 27
3.5.2. Placement of multiple cabinets 28
3.5.3. Required space for the ABB pole 29
3.6. Pole position in relation to the bus 29
3.6.1. Pole position in relation to the drive direction of the bus 29
3.6.2. Pole position in sideways direction of the bus 30
3.6.3. Maximum slope of the road in sideways direction 32
3.6.4. Maximum slope of the road in driving direction 32
3.7. Electrical engineering 33
3.7.1. Electrical installation 33
3.8. Civil installation 33
3.9. Lightning protection 34
4. Construction 35
4.1. About construction 35
4.2. Construct foundation of the Power Cabinet 36

ABB HVC Specifications

General

Brand	ABB
Model	HVC
Category	Battery Charger
Language	English