ABB rec670 User Manual

Main menu/Reset/Reset counters/PulseCounter(GGIO)/PC
In the dialog box that appears, choose YES to reset.
13.1.1.6 LDCM clear counters
Main menu/Reset/Reset counters/LDCMCommunication/LDCMX
Activating Reset of LDCM counters sets the counter concerned to zero. A reset can
be performed by affirmation in the dialog box. This is done by pressing the E key
when YES is highlighted.
13.1.1.7 Function for energy calculation and demand handling ETPMMTR
Main menuReset/Reset counters/ThreePhEnergMeas(MMTR)/ETP
Resetting accumulated energy values and the maximum demand values.
13.1.1.8 Tap changer control and supervision TCMYLTC, TCLYLTC
Main menu/Reset/Reset counters/TransformerTapControl(YLTC,84)/TCM
Main menu/Reset/Reset counters/TransformerTapControl(YLTC,84)/TCL
Resetting the counter for number of tap changer operations and the contact life
counter.
13.1.2 Reset disturbances and event list DRPRDRE
Disturbances are reset under Reset menu in the HMI tree.
Main menu/Reset/Reset disturbances
The internal event list is reset under Reset menu in HMI tree.
Main menu/Reset/Reset internal eventlist
13.1.3 Reset LEDs
13.1.3.1 Start and trip LEDs
By activating this reset, the colored LEDs above the LCD, if they are latched, will
be reset.
Main menu/Reset/Reset LEDs/Start and trip LEDs
In the dialog box that appears, choose YES to reset.
Section 13 1MRK 511 188-UEN C
Reset
94
Operator's manual

ABB rec670 Specifications

General

Brand	ABB
Model	rec670
Category	Control Unit
Language	English