ABB rec670 User Manual

11.6.11.9 Logic timer set qt
Main menu/Test/Function status/Logic/LogicTimerSet_qt
/TS
Displays available instances of the function (TS). The output data type is boolean
and indicates whether the output from the timer pickup is delayed (ON) or if the
drop out (OFF) is delayed.
11.6.12 Communication
The communication output data available under Test includes remote
communication and station communication.
11.6.12.1 Remote communication
Main menu/Test/Function status/Communication/Remote communication/
LDCMx
Displays an application dependent number of instances of CRB (Remote Binary
Communication) and CRM (Remote Multi Communication) with measurement data.
11.6.12.2 Station communication
GOOSE binary receive
Main menu/Test/Function status/Communication/Station communication/
GOOSEBinReceive/GB
Available GOOSE binary signals can be viewed here. There are a number of signal
indications per set.
MultiCommand send
Main menu/Test/Function status/Communication/Station communication/
MultipleCommandSend/MT
The MultiCommand Send indication is used to display data from the Local Optical
network (LON).
MultiCommand receive
Main menu/Test/Function status/Communication/Station communication/
MultipleCommandReceive/CM
The MultiCommand Receive indications displayed here show available sets of
output data. Each set of output data has a number of signals. Other information
displayed here shows whether there has been a change in data and whether data is
valid.
Section 11 1MRK 511 188-UEN C
Test the IED
86
Operator's manual

ABB rec670 Specifications

General

Brand	ABB
Model	rec670
Category	Control Unit
Language	English