To Next Page

To Previous Page

Displays available instances of the circuit breaker function with parameter settings

SXCBR for various time limits and pulse lengths. For example, different circuit

breakers may require different pulse lengths to react. The setting tOpenPulse is

used to set the length of the pulse required to open a breaker.

Circuit switch SXSWI

Main menu/Settings/General settings/Control/ApparatusControl/

CircuitSwitch(XSWI)/XS

Displays available instances of the circuit switch function SXSWI with a number

of settable parameters per instance for time and pulse settings, output reset and

switch type.

Local/Remote switch LocalRemote, LocRemControl

Main menu/Settings/General settings/Control/ApparatusControl/

LocalRemote/LR

Displays available instances of the local/remote function LocalRemote,

LocRemControl that permit the user to set the control mode.

Reservation input RESIN

Main menu/Settings/General Settings/Control/Apparatus Control/

ReservationInput/RE

Displays available instances of the Reservation input function RESIN with one

settable parameter per function for future use.

Switch controller SCSWI

Main menu/Settings/General settings/Control/ApparatusControl/

SwitchController(CSWI)/CS

Displays instances of the switch controller function SCSWI with eight settable

parameters. These are settings for the control model, position dependency and

various threshold times.

9.2.5.2

Control commands

Automation bits, command function for DNP3.0 (AutomationBits)

Main menu/Settings/General settings/Control/Commands/Automation bits/

ABI

A parameter to enable or disable the function is available.

Single command SINGLECMD

Main menu/Settings/General settings/Control/Commands/SingleCommand/CD

Section 9 1MRK 511 188-UEN C

Read and change settings

Operator's manual

ABB rec670 User Manual

Other manuals for ABB rec670